+91 9320277418

Email Us


Mon. - Fri. 8AM - 8PM

Hastelloy C276 Plate

Get An Instant Quote Now!

verification image, type it in the box


Hastelloy C276 Plate

Get a Quote

Most reliable Hastelloy Plate suppliers, 2.4819 Hastelloy C276 Sheet, hastelloy c276 plate manufacturers in India, suppliers of SB 575 Hastelloy C276 Strip

Biggest supplier of Alloy Hastelloy C276 Coil, check UNS N10276 Hastelloy C276 Foil Price in India, Manufacturer of Alloy C276 Plate, Hastelloy C276 SB575 4mm Thick Plate, Stockist of Hastelloy Alloy C276 Sheet in Mumbai, India

Although there are several Hastelloy variations of the nickel based material , Hastelloy C276 SB575 4mm Thick Plate is by far the most widely used alloy across various industries. The 2.4819 Alloy C276 Flat Plate is widely utilized in environments which have the most severe conditions. . Therefore the Haynes Alloy C276 N10276 Polished Plate is used in industries such as pulp and paper production, chemical processing, pollution control, industrial and municipal waste treatment, as well as for the recovery of sour natural gas in sour wells.

One Stop Shop For All hastelloy c276 plate suppliers india, importer of ASTM B575 C276 Hastelloy 2D Plate, Hastelloy C276 Alloy Strip Tape in India, manufacturers of Alloy C276 Hastelloy Hot Rolled Plate, Check C276 Hastelloy Shim Sheet Price List


Hence, these hastelloy c276 plate suppliers in Mumbai suggest using this alloy for applications in general corrosive service.The low carbon content in the Hastelloy C276 Alloy Strip Tape  is known to minimize carbide precipitation during welding operation in order to maintain corrosion resistance to structures in an as welded condition . This  Alloy C276 Hastelloy Hot Rolled Plate is resistant to the formation of grain boundary precipitates in the heat affected welded zone.  Thus, the hastelloy c276 plate suppliers in Chennai is suitable for use in most chemical process application in an as welded condition.

The materials used in the manufacture of Hastelloy C-276 UNS N10276 Cold Rolled Plate must not only confirm to the chemical requirements, but also the mechanical requirements as specified in the ASTM B575 standard . With regards to the mechanical properties of the hastelloy c276 Plate, this particular alloy needs to conform to the required tensile properties. The parameter of these tensile strength properties for this superalloy is inclusive of the Hastelloy C276 Grade Shim Stock materials tensile strength, yield strength, elongation, as well as its Rockwell hardness. Further the produced C276 Hastelloy Shim Sheet and strip needs to also conform to the specified grain sizes.

compare Hastelloy C276 Plate price with Hastelloy C22 Plate price list


What is Hastelloy C276 Plate?

ASTM B575 is a specification which covers alloy forms produced in the form of ASTM B575 C276 Hastelloy 2D Plate, sheets, along with strip. In this case, the ASTM B575 specified Hastelloy UNS N10276 Polished Cold Drawn Plate  is chemically a low carbon based nickel alloy. Apart from nickel, the Nickel Alloy C276 Clad Plate additionally contains chromium and molybdenum, which in turn give the alloy its corrosion resistance properties especially against pitting and crevice corrosion in reducing environments. And chromium offers resistance against oxidizing media.


Specification of Hastelloy C276 Plate

GradeASTM B575 UNS N10276, Hastelloy C276 - UNS N10276 - ALLOY C-276 (Ni/ 15Cr/ 16Mo/ 4W)
TypeFoils, Coils, Plate, Strip, Sheet, Flats, Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
Alloy Hastelloy C276 Plate Thickness0.3 to 1200 mm or as required
C276 Hastelloy plate Width0-2500mm or as required
ASTM B575 Alloy C276 Plate Length0-12mm or as required
ASTM B575 Alloy C276 Plate surfaceBA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B575 Alloy C276 Plate, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc.
UNS N10276 Hastelloy C276 Plate ProcessHot/ Cold Rolled


Other Useful Information of Hastelloy C276 Plate for buyers

ASTM B575 Alloy C276 Plate, Sheet and Strip
ASTM B 575/B 906 & ASME SB 575/SB 906, ISO 6208, DIN 17750, VdTÜV 400/12.98
Hastelloy C276 Plate standards and approvals
  • ISO 15510
  • EN 10051
  • EN ISO 18286
  • EN 10088-1
  • ASTM A 480
  • EN ISO 9445
  • ASTM A 959
Tolerances of width and thickness
  • EN 10151 ASTM B575 Alloy C276 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B575 Alloy C276 strip (general)
UNS N10276 Plate HardnessHalf Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B575 Alloy C276 Sheet suppliers
Standard ASTM B575 Alloy C276 Plate & Sheet Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Hot rolled C276 Hastelloy plate 3.0–10.0 mm
  • Cold rolled C276 Hastelloy plate 0.5-6.4 mm
Availability of ASTM B575 Alloy C276 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Plasma profilesAs per customer's drawings

To provide a full profiling service in India we use numerous profiling methods including:

  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Value added services for ASTM B575 Alloy C276 Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Value added services for ASTM B575 Alloy C276 PlateWaterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Hastelloy C276 Plate OriginEuropean Origin, Indian Origin, Japanese Origin
Manufacturer & exporter of
  • Alloy Hastelloy C276 Clad plate: Alloy Hastelloy C276 Clad plate is a composite steel plate made by bonding UNS N10276 Hastelloy C276 plate, etc.
  • C276 Hastelloy Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • ASTM B575 Alloy C276 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM B575 Alloy C276 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
TestSGS testing, UT, TUV etc
Packing of Hastelloy C276 PlateBundles with waterproof cloth outside or plywood box
Why buy ASTM B575 Alloy C276 Plate from Neonox Overseas?
  • EN 10204 3.1
  • Free sample
  • Free quote
  • NABL Approved Lab Reports
  • Mill Test Certificate is supplied with shipment.
  • Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
  • Minimum Nitrogen content and Ferrite Count Test
  • Any third party inspection is accepted.


Alloy C276 Plate Price in India

Price list of Hastelloy C276 Plate in IndiaUNS N10276 Hastelloy C276 Plate Price in India (INR)C276 Hastelloy plate Price in UK Pound sterlingAlloy Hastelloy C276 Plate Price in UAE Dirham
Hastelloy C276 Plate-135 Mm Od X 6mm ThkINR 3,79341.09 UK Pound sterling196.72 UAE Dirham

This is an approximate Cost of C276 Hastelloy Sheet in India. For factory price buy directly from Hastelloy C276 Plate manufacturers in India, check latest ASTM B575 Alloy C276 Plate price list & stock sizes please mail us.

ASTM B575 Alloy C276 Plate melting range

ASTM B575 Alloy C276 Plate melting range
°F : 2415-2500
°C: 1325-1370


UNS N10276 Hastelloy C276 Plate density

UNS N10276 Hastelloy C276 Plate density
lb/in3 : 0.321
g/cm3 :8.89


Weight per Unit of AMS 5599 Alloy C276 Hastelloy plate

C276 Hastelloy Sheet Weight & Density

ThicknessAlloyPlate Weight per Unit AreaDensity
3/16 inchesHastelloy C2760.06000 lbs/in²42.184176 kg/m²0.315 lbs/in³8.72 g/cm³
1/4 inchesHastelloy C2760.08 lbs/in²56.245568 kg/m²0.315 lbs/in³8.72 g/cm³
3/8 inchesHastelloy C2760.121 lbs/in²85.0714216 kg/m²0.315 lbs/in³8.72 g/cm³
1/2 inchesHastelloy C2760.161 lbs/in²113.1942056 kg/m²0.315 lbs/in³8.72 g/cm³
5/8 inchesHastelloy C2760.196 lbs/in²137.8016416 kg/m²0.315 lbs/in³8.72 g/cm³
3/4 inchesHastelloy C2760.235 lbs/in²165.221356 kg/m²0.315 lbs/in³8.72 g/cm³
7/8 inchesHastelloy C2760.274 lbs/in²192.6410704 kg/m²0.315 lbs/in³8.72 g/cm³
1 inchesHastelloy C2760.313 lbs/in²220.0607848 kg/m²0.315 lbs/in³8.72 g/cm³
1 1/4 inchesHastelloy C2760.391 lbs/in²274.9002136 kg/m²0.315 lbs/in³8.72 g/cm³
1 1/2 inchesHastelloy C2760.47 lbs/in²330.442712 kg/m²0.315 lbs/in³8.72 g/cm³
1 3/4 inchesHastelloy C2760.549 lbs/in²385.9852104 kg/m²0.315 lbs/in³8.72 g/cm³
2 inchesHastelloy C2760.627 lbs/in²440.8246392 kg/m²0.315 lbs/in³8.72 g/cm³
2 1/4 inchesHastelloy C2760.705 lbs/in²495.664068 kg/m²0.315 lbs/in³8.72 g/cm³
2 1/2 inchesHastelloy C2760.784 lbs/in²551.2065664 kg/m²0.315 lbs/in³8.72 g/cm³
2 3/4 inchesHastelloy C2760.862 lbs/in²606.0459952 kg/m²0.315 lbs/in³8.72 g/cm³
3 inchesHastelloy C2760.941 lbs/in²661.5884936 kg/m²0.315 lbs/in³8.72 g/cm³


Size chart of C276 Hastelloy plate

Stocked Sizes
Size (in inches)
Size (in mm)


Dimensions of Hastelloy C276 Plate

ASTM B575 Alloy C276 Plate Imperial Dimensions

Plate Surface finishGauge (in)Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate10–2472*
2D – Cold rolled, heat treated, pickled plate12–2460
BA Mexinox only18–2848
Polished plate (not brushed)11–2460
Temper rolled plate Mexinox only13–2948

ASTM B575 C276 Alloy Plate Metric Dimensions

Plate Surface finishThickness (mm)Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate0.25–8.02032
2D – Cold rolled, heat treated, pickled plate0.4–6.351524
2E – Cold rolled, heat treated, mechanically descaled plate0.4–8.02032
2R – Cold rolled, bright annealed plate0.25–3.51524
2H – Work hardened plate0.4–6.351524
Polished, brushed plate0.5–4.01524


Ready Stock of Alloy Hastelloy C276 Plate

we stock following Types of Hastelloy C276 Plate:

C276 Hastelloy plateUNS N10276 Hastelloy C276 Rolling Plate
ASTM B575 Alloy C276 Chequered PlateAlloy Hastelloy C276 Quarto Plate
UNS N10276 Hastelloy C276 Cold Rolled PlateAlloy Hastelloy C276 Bbq Plate
Alloy Hastelloy C276 Hot Rolled PlateASTM B575 Alloy C276 Perforated Plate
Alloy Hastelloy C276 Plate Mill FinishHastelloy C276 Din 2.4819 Thin Plate
ASTM B575 Alloy C276 Plate 2b FinishAlloy C276 Nickel Diamond Plate
Hastelloy C276 Din 2.4819 Chequer PlateUNS N10276 Alloy C276 Tread Plate
Alloy C276 Nickel Clad PlateHastelloy C276 Alloy Tisco Plate
Hastelloy C276 Alloy Checker Plate2.4819 Alloy C276 Polished Plate
UNS N10276 Alloy C276 Plate Mirror FinishHastelloy C276 Grade Chequered Plate
2.4819 Alloy C276 Plate Brushed FinishHastelloy C276 Superalloy Hot Rolled Sheet
Hastelloy C276 Grade 10mm PlateHastelloy Alloy C276 Cold Rolled Sheet
Hastelloy Alloy C276 Custom Cut PlateHastelloy C276 Nickel Alloy Sheet
Hastelloy C276 Superalloy 1/4 Inch Plate2.4819 Hastelloy C276 Perforated Sheet
Hastelloy C276 Nickel Alloy Embossed PlateC276 Hastelloy Plasma Cutting Plate
2.4819 Hastelloy C276 Checkered PlateASTM B575 Alloy C276 Laser Cut Plate


Hastelloy C276 Hot rolled Plate & Hastelloy C276 Cold rolled Plate, Sheet Stock List

AlloyProduct formDimension
ALLOY C-276 (Ni/15Cr/16Mo/4W)Sheet; cold rolled, solution annealed0.4x914.4 mm x coil, Weight=3.10 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W)Sheet; cold rolled, solution annealed0.5x1000 mm x coil, 4.4 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W)Sheet; cold rolled, solution annealed0.7x1219 mm x coil, 7.7 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W)Sheet; cold rolled0.965x1219x3657 mm, 38.25 kg/pc
INCONEL C-276 (Ni/15Cr/16 Mo/4W)Sheet; cold rolled, solution annealed1.0x1219 mm x coil, 10.8 kg/m
INCONEL C-276 (Ni/15Cr/16Mo/4W)Sheet; cold rolled, solution annealed1.5x1220x3000 mm, 48.5 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)Sheet; cold rolled, solution annealed1.6x1220x3000 mm, 52.0 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)Sheet; cold rolled, solution annealed2.0x1220x3000 mm, 63.0 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W)Sheet; cold rolled, solution annealed, pickled3.0x1220x3000 mm, 99.0 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W)Sheet; CR, Pkl, solution annealed,4.0x1200x3000 mm, 134 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)Plate; hot rolled, descaled, sol annealed, sheared6.0x2000x6000mm, 664 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)Plate; hot rolled, sol annealed, descaled, sheared8.0x2000x6000 mm, 902 kg/pc
ALLOY C-276 (Ni/15Cr/16Mo/4W)Plate; hot rolled12.0x1000x1000 mm, 107 kg/pc
INCONEL C-276 (Ni/15Cr/16Mo/4W)Plate; hot rolled25.0x1200x3000mm, 198 kg/pc

Equivalent Grades of Hastelloy C276 Plate

Hastelloy C2762.4819N10276NW 0276ХН65МВУNiMo16Cr15WЭП760

UNS N10276 Hastelloy C276 Plate Properties

Chemical Composition of ASTM B575 Alloy C276 Plate

C2760.010 max1.00 max0.08 max0.03 max2.50 max50.99 min*14.50 – 16.504.00 – 7.0015.00 – 17.000.04 max


ASTM B575 Alloy C276 Plate Mechanical Properties

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Hastelloy C2768.89 g/cm31370 °C (2500 °F)Psi – 1,15,000 , MPa – 790Psi – 52,000 , MPa – 35540 %

MaterialUltimate Tensile (min)Yield Strength (Min)Elongation %Hardness Rb
C276 Plate107.474150.33476789
C276 Sheet115.579654.63766086


Difference Between Hastelloy and Inconel


Hastelloy® could be a trademark for a series of high-strength, nickel based, corrosion resistant alloys created by Haynes Worldwide.

Hastelloy Melting Point, Density and Tensile Strength

 DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
C228.69 g/cm31399 °C (2550 °F)Psi – 1,00,000 , MPa – 690Psi – 45000 , MPa – 31045 %
C2768.89 g/cm331370 °C (2500 °F)Psi – 1,15,000 , MPa – 790Psi – 52,000 , MPa – 35540%
B29.2 g/cm31370 °C (2550 °F)Psi – 1,15,000 , MPa –760Psi – 52,000 , MPa – 35040%
B39.2 g/cm31370 °C (2550 °F)Psi – 1,15,000 , MPa –760Psi – 52,000 , MPa – 35040%
C48.64 g/cm31350-1400 °C78336555%
Hybrid BC18.83 g/cm³1343 - 1443°C72531040%
X8.22 g/cm³1355°C655 MPa240 MPa35%



Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Melting Point, Density and Tensile Strength

 DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
6008.47 g/cm31413 °C (2580 °F)Psi – 95,000 , MPa – 655Psi – 45,000 , MPa – 31040 %
6018.1 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530 %
6178.3g/cm³1363°C≥ 485 MPa≥ 275 MPa25 %
6258.4 g/cm31350 °C (2460 °F)Psi – 135,000 , MPa – 930Psi – 75,000 , MPa – 51742.5 %
6908.3g/cm³1363°C≥ 485 MPa≥ 275 MPa25 %
7188.2 g/cm31350 °C (2460 °F)Psi – 135,000 , MPa – 930Psi – 70,000 , MPa – 48245 %
7258.31 g/cm31271°C-1343 °C1137 MPa827 MPa20 %
X-7508.28 g/cm31430°C1267 MPa868 MPa25 %


Alloy C276 Plate Features

  • Low carbon content which minimizes grain-boundary carbide precipitation during welding to maintain resistance to corrosion in heat-affected zones of welded joints
  • Exceptional resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides
  • Excellent corrosion resistance in reducing environments
  • High nickel and molybdenum contents providing good corrosion resistance in reducing environments
  • One of few materials to withstand the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide
  • Resistance to localized corrosion such as pitting and stress-corrosion cracking


Hastelloy C276 plate uses

  • Organic chloride process equipment.
  • Evaporators, heat exchangers, filters and mixers used in sulfuric acid environments.
  • Equipment for flue-gas desulfurisation plants.
  • Equipment for processes utilizing halide or acid catalysts.
  • Digesters and bleach plants in the paper industry.
  • Sulfuric acid reactors.
  • Components exposed to sour gas.


Difference between Hastelloy C276 Plate, Sheet, & Foil

  • Thickness greater than 6.35 mm is called a Hastelloy C276 Plate.
  • Thickness greater than 0.15 mm and less than 6.35mm is called a Hastelloy C276 Sheet.
  • Thickness less than 0.15mm is called a Hastelloy C276 Foil.


1200 happy customers of Hastelloy C276 plate in following States

Tamil Nadu
Andhra Pradesh
West Bengal
Uttar Pradesh


Successfully projects completed of Hastelloy C276 Sheet in following countries

United Arab Emirates
Saudi Arabia(KSA)


One of India’s largest supplier of Hastelloy C-276 UNS N10276 Cold Rolled Plate, stockholder of JIS NW C276 Plate, Hastelloy C276 N10276 Slitting Coil in India, wholesaler of Hastelloy C276 Grade Shim Stock in Mumbai, manufacturers of Nickel Alloy C276 Clad Plate
Get a Quote from Hastelloy UNS N10276 Polished Cold Drawn Plate suppliers, dealer of 2.4819 Alloy C276 Flat Plate stockist of Hastelloy C276 ASTM B575 Polish Plate, Hastelloy C276 Circle, traders of Haynes Alloy C276 N10276 Polished Plate